A guide to blending with Distress Ink pads.

Anything to do with stamping, inks and digis.
User avatar
Calv
Posts: 7908
Joined: Fri Jul 16, 2004 2:43 pm
Location: Hampshire
Contact:

A guide to blending with Distress Ink pads.

Postby Calv » Wed Oct 22, 2008 6:41 pm

A few people have asked about my blending technique when using distress pads, also about the basic tools needed for this. So here is a little guide to get you started with the distress pads and blending if you have not dabbled with it already.

May i add that i have not been doing this for long myself, so if anyone has any other tips on blending that i might have missed out, please chip in and say. This guide is mainly based upon my own experience of working with distress pads and what i have learnt from others, so your experiences may indeed differ or be of more use. Thanks. :D

Ok, distress ink pads. The most common ones used (may be the only ones in fact) are the Tim Holtz Ranger Distress Ink pads. These are acid-free, non-toxic, fade resistant, water-based dye inks. Ideal for many projects and can give a great "aged" look to a project. There are 24 colours in this particular range.

Image

These have so many uses, people even forget sometimes that you can use them for stamping, but this is about blending so i'll move on. Remember though, waterbased also means they can be affected by water. Sorry if that sounds obvious, but when i said you could use them for stamping, they will not be as permanent as solvent based archival inks and the likes.

If at all possible, see the ink pads in person if it is your first time choosing colours. Maybe someone can show or send you samples of how the colour looks on card before you choose and buy. This reduces the risk of you spending out on colours that you are not too keen on once you start using them.

Another thing, don't just take the lid off in the shop and go by the colour of the ink pad. Often the pad looks different than the colour it produces.

Tools for applying the ink.

For the best results, i find it better to use the proper tools for the job. These can however be improvised upon if you do not have the tools available. (I'll talk about that later).

Firstly you will need an applicator tool and blending foam.....

Image

Notice i said "blending foam". There are also "blending felt pads", however the felt pads are used more for alcohol inks, for the technique i am describing, you need the foam pads.

These pads are foam on one side, velcro on the other. They just stick nicely to the velcro on the underside of the applicator tool. Easy as that!

Remember, do not throw away the pad once it has been used, as long as you use it for the same colour, it can be used again and again until it gets worn.

As far as tools are concerned, thats all you need to blend distress inks.

Right then....cardstock/paper. As far as i am aware, it does not make too much difference whether you do this technique onto cardstock or paper. I've used the ink on many different weights of card/paper and it works fine on all so far.

To apply the distress ink, dab your foam pad into your ink pad. With practice, you will get to know what is too much or too little. Some colours are stronger than others, in which case you may want to dab the freshly inked foam pad onto a scrap piece of card to get rid of some of the ink. Remember, you can always add more, but to remove a thick wet amount of ink is a lot harder.

To start the technique, you need to have your applicator tool and pad at an angle to the piece you are going to ink.....also, do not start directly on the card, start off of the card.....this ensures you hit the card blending.

Image

This will ensure that you hit the card blending. You can see from the pic below, my ink starts off of the card and continues to wherever i want to blend up to. You do not have to start quite so far off the card, i've just done this so it's easy for you to see.

Image

So off you go, keep stroking your foam pad towards the card, take it off once you're on the card and then return to the start point off the card. Hold the card with your other hand to keep it still. I find it better to place the holding fingers close to where i am blending, as this stops the tag creasing from the pressure of the pad when you stroke over it.

For an excellent demonstration of how this technique is done, i would suggest watching a very talented guy called Dan make this tag on his blog....the video not only shows you blending, but how to use masking with the inks too. A very helpfull tutorial indeed.

Distress Ink blending turtorial

Here is an example of a very basic tag i did for the purpose of this guide. The photo shows where i have used four colours, red, blue, green and yellow. I have purposely left the ink marks on the outside of the tag to show you the direction i blended from. Gradualy work each colour into the one next to it, so you lightly overlap it. The colours will blend into each other if you don't have too much ink on your pad.

Image

Basicaly i just came in from each corner with a different colour. The image was stamped on before i blended, just ensure the stamping ink has dried before blending over the top of it.

*Note, the "red ink" on the tag is a good example of where i had a little too much on the foam pad. It has not blended so well with the yellow to the left of it.

Here you can see i have used lightly blended the edges with a purple ink..

Image

If you like, you can add another effect by either spraying the tag with water using a mister for an even mottled look, or flick drops of water for a random and more obvious effect. For best results, apply the water drops/spray whilst the ink is still fresh. If the distress ink is allowed to dry, it does not have as much of an effect.

Image

So there you are, a simple introduction to using the blending method with distress ink. I found that the secret to getting the blended look, is to just keep on going with the foam pad until there is no ink left on it....then keep going, even the empty pad will blend the ink nicely.

For those who do not have the applicator tool and blending foam pad, another option is to use your chalking tool and some stamping foam which you can buy in A4 sheets. (Thanks for this tip Maddy).

Cut a small square and grip it between the teeth of the crocodile clip...

Image

This is not quite as good as the proper applicator as it is not as firm and has a smaller surface area, however it is better than nothing if you have no tools. You can also use this method for more detailed blending.

Regarding technique, i have seen some people use circular motions with the pads when applying the inks, so maybe try this too and see what you like. Ensure though that you keep the pad angled as this eliminates marks caused by the edges of the pad. That said, once you have barely any ink left at all on your pad, you can get away with using the flat surface of your pad, but go carefull....you can easily mark your work like this.

Lastly, a neat little project for you to house your foam pads ready for the next blending session.....a foam storage chest!....heres the one i made...

Image

So easy to make, just a few matchboxes stuck together, ink the fronts to correspond with the pad inside, and wrap a length of card around it to hold it all together. Decorate as you desire. I got this idea from a lady on a craft storage site, heres her post about how to make one....

Foam storage chest tutorial

Thanks for looking, i hope this helps anyone who is new to blending distress inks. If i have missed anything, if any of this info is incorrect, or you have any additional usefull tips, please feel free to add them.

All of the inks and tools metioned above can be purchased from the forum sponsors.

Happy blending! :wink:

Calv.
Last edited by Calv on Sat Nov 08, 2008 1:58 pm, edited 2 times in total.

User avatar
Net
Posts: 11049
Joined: Wed Nov 12, 2003 1:15 pm
Location: Rotherham-ish

Postby Net » Wed Oct 22, 2008 7:03 pm

Great tutorial Calv.

I love to play with ink too - I don't use the applicator though. I buy the foam and cut it into squares and use these to apply the ink. I've written the colours on each piece of foam so I don't contaminate the colours.

I happened to get this top tip from a certain Mr H himself :wink:
If you don't know what to do with new stuff, hide it until you do!


http://caique-momma.blogspot.com/
http://totallygorjuss.blogspot.com

User avatar
Calv
Posts: 7908
Joined: Fri Jul 16, 2004 2:43 pm
Location: Hampshire
Contact:

Postby Calv » Wed Oct 22, 2008 7:05 pm

Net wrote:Great tutorial Calv.

I love to play with ink too - I don't use the applicator though. I buy the foam and cut it into squares and use these to apply the ink. I've written the colours on each piece of foam so I don't contaminate the colours.

I happened to get this top tip from a certain Mr H himself :wink:


Best mates eh? :wink:

Do you just hold the foam then with your fingers? I'd struggle withthat as the foam isn't as stiff.

Thanks Net

Calv.

User avatar
Carolyn
The Boss
Posts: 42865
Joined: Wed Mar 13, 2002 12:00 am
Location: Ampthill, Beds
Contact:

Postby Carolyn » Wed Oct 22, 2008 8:06 pm

Net wrote:Great tutorial Calv.

I love to play with ink too - I don't use the applicator though. I buy the foam and cut it into squares and use these to apply the ink. I've written the colours on each piece of foam so I don't contaminate the colours.

I happened to get this top tip from a certain Mr H himself :wink:
I do the same - although never thought of writing the colour down!

What I was told to do was bend the foam and use the bent part.

Great tutorial Calv - it is fab - I can make it into a web page 8)

I do find that the inks kind of carrying on blending while they are drying if that makes sense - and sometimes to hard edges can disappear

User avatar
Anne
Posts: 2023
Joined: Fri Apr 02, 2004 2:56 pm
Location: Essex

Postby Anne » Wed Oct 22, 2008 8:07 pm

Thank you very much for the tutorial Calv, can't wait to have a go.
Anne

User avatar
craftyhazelnut
Posts: 11311
Joined: Thu Aug 05, 2004 11:45 pm
Location: Bromley, Kent
Contact:

Postby craftyhazelnut » Wed Oct 22, 2008 10:42 pm

Great tutorial, Calv. I'm another one that uses the blending foam without an applicator.

Love Hazel

User avatar
Calv
Posts: 7908
Joined: Fri Jul 16, 2004 2:43 pm
Location: Hampshire
Contact:

Postby Calv » Wed Oct 22, 2008 11:21 pm

Thanks for the replies everyone.

I have to admit i've not tried it without an applicator, how do you hold it in your fingers? Do you sort of bend it lengthways and use the long bent edge?

Calv.

Crafty Barbie
Posts: 1365
Joined: Mon Jan 28, 2008 2:50 pm
Location: East Kilbride, Scotland

Postby Crafty Barbie » Wed Oct 22, 2008 11:27 pm

Thanks so much for that tutorial as I didn't have a clue where to start but wanted to try it out. Those samples you have made are so effective Calv even though they are so simply done.

User avatar
Carolyn
The Boss
Posts: 42865
Joined: Wed Mar 13, 2002 12:00 am
Location: Ampthill, Beds
Contact:

Postby Carolyn » Thu Oct 23, 2008 9:18 am

Calv wrote:Thanks for the replies everyone.

I have to admit i've not tried it without an applicator, how do you hold it in your fingers? Do you sort of bend it lengthways and use the long bent edge?

Calv.
I guess it depends on the size of your foam - but I bend mine widthways holding one finger in the bend and thumb and another finger at each end
Last edited by Carolyn on Thu Oct 23, 2008 1:36 pm, edited 1 time in total.

User avatar
Calv
Posts: 7908
Joined: Fri Jul 16, 2004 2:43 pm
Location: Hampshire
Contact:

Postby Calv » Thu Oct 23, 2008 9:36 am

Thanks Carolyn, will give that a try.

Calv.

User avatar
cazzytoo
Posts: 984
Joined: Fri Apr 14, 2006 11:05 pm
Location: Wiltshire
Contact:

Postby cazzytoo » Sat Oct 25, 2008 6:36 pm

I have the cut and foam stuff, and I have the applicator with felt pads. I wondered if funky foam would work with the applicator, might have a go!

Great tutorial Calv which just goes to show I should read more sections and not just challenges!

User avatar
Calv
Posts: 7908
Joined: Fri Jul 16, 2004 2:43 pm
Location: Hampshire
Contact:

Postby Calv » Sat Oct 25, 2008 7:08 pm

cazzytoo wrote:I have the cut and foam stuff, and I have the applicator with felt pads. I wondered if funky foam would work with the applicator, might have a go!



You could try it, but i've tried several different types of foam as an alternative and they haven't been as good.

Thats not to say don't try though, thats how new techniques and material get discovered. :)

Calv.

User avatar
cazat81
Posts: 13150
Joined: Fri Feb 06, 2004 10:18 am
Location: Cambridge
Contact:

Postby cazat81 » Sat Oct 25, 2008 7:17 pm

Fabulous tutorial :D You inspired me to have another go with distress inks, so pleased I did cos I just love them :D I have just read an article on colouring in with distress inks, again, something new to me but intend having a try.
I am another who doesn't use the tool thingy, cannot get on with it I am afraid :roll: I cut the foam, once inished I label/store in small plastic bag.
Could not agree more Calv with the trying out other materials etc. I am ocassionally brave and have a play to see if something else works - like improvising, even better if it costs less or nothing :D
Carole

User avatar
DingleDel
Posts: 5989
Joined: Fri Mar 04, 2005 6:58 pm
Location: Kent

Re: A guide to blending with Distress Ink pads.

Postby DingleDel » Fri Apr 08, 2011 1:31 pm

Decided to search this out as I fancied trying some inking again! :o

Has anyone tried those triangular make up sponges? Are they the same sort of consistency/texture?

Also, for something similat to what you have shown Calv, do you find it best to stamp your image first, then blend around it OR blend your background then stamp over the top? :-?

Sorry for the daft questions! :roll:
Adele.

http://www.dillydallydingle.blogspot.com
http://www.pinterest.com/dingledel/

Stampin Up! Demonstrator for Medway, Kent and wherever life takes me!

User avatar
Carolyn
The Boss
Posts: 42865
Joined: Wed Mar 13, 2002 12:00 am
Location: Ampthill, Beds
Contact:

Re: A guide to blending with Distress Ink pads.

Postby Carolyn » Fri Apr 08, 2011 6:33 pm

I think you can do it either way. I have done it first and stamped over, but some images I got in a swap I inked as I didn't want them on a white card.

No I have not tried the makeup sponges - but am sure they would work. I bought a sheet of the cut and dried, and just use it with my hands - never tried the holder - I was too mean!


Return to “Rubber Stamping”

Who is online

Users browsing this forum: No registered users and 1 guest